With the popularity of the cars that muscle car feel like a strong and powerful was the desire of many pilots fans. A great change is to achieve this using an exhaust system. This device uses a small increase in the discharge, that the performance of the engine a bit 'and then the sound of a classic muscle car.
This system can be made by car in just a few hours with simple mechanical devices.
Exhaust System
1. Put the car in a parking ramp and use the parking brake. L 'next step is to check the front wheels to prevent movement.
2. Use a penetrating fluid on the exhaust so that it would be easier to remove the tube. Allow the liquid to work for a few minutes.
3. secure with the use of gloves and goggles to avoid the rust cut with the metal edges to Stay. Loosen the terminals of the exhaust gas with a spanner.
4. Remove the screws from the bracket to the back of the car exhaust. Unplug the systemHead-pipes through the work of the back of the car. Remove the rubber isolators and hanging rail with the wrench. You will now be able to lower the exhaust gas from the machine. Save the rubber isolators and hanging rails for the system later. Keep the old exhaust system on the side.
5. Install the new exhaust system. Install the rubber insulators and the trailer for the new exhaust system and using the original bolts with a spanner. Everything isas those installed on the stock exhaust.
6. You have the system to the vehicle. The exhaust pipe should be facing the rear. Place the tubes of the new system on its head pipes are to them. Secure the bracket to the bottom of the machine and then install the brackets that are supplied to the system. Tighten the clamps with a spanner.
7. Take away the heel and releasing the parking brake. Driving the car in front of the ramps and you're done! Your car will behours are the muscles that you are looking for.
To install an exhaust system
No comments:
Post a Comment