Showing posts with label system. Show all posts
Showing posts with label system. Show all posts

Saturday, November 26, 2011

1999 GMC Yukon SLT Start Up, Exhaust, In Depth Tour, and Short Drive

1999 GMC Yukon SLT Start Up, Exhaust, In Depth Tour, and Short Drive Video Clips.





In thisvideo I give a full in depth tour of a 1999 GMC Yukon. I take viewers on a close look through the interior and exterior of this suv while showing details, over viewing of features, and noting unique styling cues to the vehicle itself. I also show the engine and the details of it, start it up and see how it sounds under acceleration. A thorough tour/review of this suv designed to give others a greater overall appreciation of the vehicle.

Tags: 1999, GMC, Yukon, SLT, start, up, crank, starting, engine, v8, revving, rev, custom, exhaust, k&n, and, air, intake, test, drive, driving, full, in, depth, review, tour, walk, around, interior, exterior, overview, of, features, trunk, space, loaded, leather, sound, system, demo, demonstration, 1998, 1997, 1996, 2000, 1995, chevrolet, tahoe, saabkyle, 04

kerosene heater repair tenba large messenger bag

Monday, November 21, 2011

On-Board Brake Stroke Monitoring System

On-Board Brake Stroke Monitoring System

Exhaust System

On-board brake stroke monitoring systems have been developed to communicate air braking issues in real time with the drivers, inspectors, or mechanical personnel. These systems are designed to inform the vehicle operator of a number of different issues that could potentially happen with an air braking system.

The most common braking system issues are due to over stroking, non-releasing, or inoperative pushrod travel issues. When these issues arise the truck brakes can either work at a lower than the necessary levels or become completely inoperable.

By installing an on-board stroke monitoring system driver will be alerted to these potential issues in real time as they happen. The cab of the truck will have a driver interface installed that is designed to light up LED lights when potential braking issues are discovered.

Since drivers are often unaware of existing brake defects and reduced braking capability, brake monitoring systems provide valuable information to let the driver know when brakes are out of adjustment or not working properly so that corrective measures can be taken to maintain the vehicle's safe operation.

The on-board brake stroke monitoring system is able to alert the driver to multiple safety issues regarding the braking system. Drivers could be alerted to worn, seized, or out of adjustment manual and automatic slack adjusters, slack adjusters that have not been installed properly, pushrods that have been cut too short, ruptured actuator diaphragms or leaking airlines, plugged or crimped airlines, frozen or stuck air valves, cracked or broken brake drums, brakes shoes that may be "hung-up" due to other faults in the foundation brake system or slack adjuster faults, push rods that have not retracted due to components binding, broken parking brake springs, and worn S-cams.

Voit Fitness Equipment hawkins pressure cooker parts Nebo Sleeping Bag

Friday, November 18, 2011

Discount Gibson 66556 Stainless Steel Split Rear Dual Cat-Back Exhaust System

Gibson 66556 Stainless Steel Split Rear Dual Cat-Back Exhaust System Review


Sale Price : $501.58


Availibility : Usually ships in 24 hours



Gibson 66556 Stainless Steel Split Rear Dual Cat-Back Exhaust System Overview

For the enthusiast who wants an awesome look and aggressive powerful sound this split rear bolt-on cat-back exhaust is for you. Gibson’s exhaust systems decrease backpressure, allowing the engine to produce more torque, increase horsepower. Typical gains average of 15-20 horsepower.




Available Stores


Amazon.com
$501.58 (New)
Usually ships in 24 hours

what is the best infant car seat

Thursday, November 17, 2011

Flowmaster 17159 Cat-back System - Single Side Exit - American Thunder - Moderate Sound

Flowmaster 17159 Cat-back System - Single Side Exit - American Thunder - Moderate Sound Review


List Price : $340.09


Sale Price : $214.62


Availibility : Usually ships in 24 hours



Flowmaster 17159 Cat-back System - Single Side Exit - American Thunder - Moderate Sound Feature

  • Mandrel bent 16 gauge aluminized tubing
  • Moderate exterior exhaust tone
  • Includes hangers and hardware for easy installation
  • Connects after factory catalytic converter
  • Dyno tuned for maximum performance

Flowmaster 17159 Cat-back System - Single Side Exit - American Thunder - Moderate Sound Overview

For the person who wants a subtle custom appearance with all the benefits that a Flowmaster cat-back exhaust system provides. S.O.S. (Single Out Side) systems are the perfect choice. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Extended cab/Short bed only.

Skip Hop Owl Lunch Bag

Wednesday, November 16, 2011

Stereo System Upgrades For Cars and Trucks

Stereo System Upgrades For Cars and Trucks

Exhaust System

Most people want to personalize their ride with stereo upgrades and the latest bling items. In this article we will discuss the latest options for upgrading your vehicle's sound system. The first thing to start off with is deciding where to put all the components. Many people will want the CD changer out of view. Simple sheet metal brackets can be made to mount it inside a console below the surface to where the console lid clears the unit and goes undetected from any one's view. The head unit with AM FM tuner can be installed behind the glove box lid using 20 gauge metal and bent to hold the unit which is standard size with a built in bracket system. To hide a sub woofer there are many places.

A good location is behind the rear seat up against the package tray where there is ample room to upgrade to a much larger speaker. A paper board mockup will allow you to know how big of an enclosure to purchase at your local supplier. Be sure the minimum air space required was met while holding it all in place. All major speakers MFG list their minimum air space requirements for any given speaker. You may have to modify the back of the rear seat a bit to allow the sub clearance and removing a wire or two will not make much difference in supporting your back. Another place is where you rest your feet in the front seat. The kick panels are an excellent place for the front speakers. You can angle them to still allow good foot room while the sound waves hit the opposite side passenger directly for optimum sound. When installing sound systems we always look for what the vehicle will offer for locations that allow different alternatives such as places to hide speakers and different sound box sizes depending on ones desires.

If you're looking for first row, front seat sound then a mid range front floor speaker where the floor is cut out to house 8 inch Dyn-Audio mid range speakers is the ticket. Pointing them directly at the front seat passenger's ear for max sound is the only way because they are directional speakers. Right under the dash is a great place to install Image Dynamic Horn speakers for highs/tweeters that offer super crisp vocals and the lead guitars will come to life. In effect it will sound like an entire band is sitting on the hood of the car with unreal clarity and 0 distortion detected by any humans ear. When building hi-level systems such as this high power is needed so the front speakers would be powered by a JL 450/4v2 amp for max output with 1 gauge power leads and crossovers with separate equalization installed. For subwoofers you need a lot of power such as 2-1000 watt JL amps to provide power for a qty of 6 -10 inch W6 JL drivers in the trunk. Image Dynamics EQ will allow complete adjusting to the system.

Installing an EPICENTER by Audio Control is a nice component that allows you to bring out more bass in older music then it originally had. It features A Dial Rotation. Your fuse block needs to be upgraded when you go this route to massive 1-0 wires and relays to keep everything powered up safely. Hiding wiring where carpet can cover over them and away from heat sources like exhaust systems is very important and a door step plate channel is an excellent way to run the wires front to back. We like Optima batteries to power everything as they are gel and have no acid residue. Yellow Red and or Blue top are built for marine use for extra reserve capacity. Keep in mind that you may have to upgrade the amps in your alternator and these are available at most auto parts stores. XM satellite radio is another nice touch. On projects where other components are taking up space you have to improvise.

To build a custom Sub Box take MDF Wood and cut out 6 MDF rings on a router to accept JL W6 speakers. Then mount/glue them in the right matching angles and you are then ready to start covering them. We take fleece and cover them tight using a staple gun then they are wrapped and ready for some fiberglass resin work. Mix up and coat them with resin saturating all materials to get a strong first layer to support thicker matting later.

You can then use a porter cable tool and buzz out the speaker sections. The next step is to tape it off to get ready for the outer cover. Wrap it much in the same way but use polyester cloth and tape the edges around the cars trunk perimeter. Then trim it out much in the same way and also cut out a shaped hole in the back section to allow the sound to come toward the front of the car, The trunk hinges get a U pad treatment that stays with the hinge and fits with a small gap when up, just behind it you can add a trim piece to finish it out.You will then want to sand it down and apply some hi build primer and you are almost done. Simply mount the speakers with T-nuts that have teeth which pull in to the MDF wood when tightened.

Article provided by the Hot Rods team of Jeff Lilly Restorations!

treadmill surge protector

Friday, November 11, 2011

Exhaust System Repair Tape, 2" x 40" card (82009)


Exhaust System Repair Tape, 2" x 40" card (82009)


Rate This Product :


Exhaust System Repair Tape, 2

Exhaust System Repair Tape, 2
No dismantling or special tools needed. Repair tape will stop exhaust noise and seal out dangerous fumes. Rxhaust tape is made from aluminum and a high temperature bonding agent.
Exhaust System Repair Tape, 2

Available at Amazon : Check Price Now!


Exhaust System Repair Tape, 2
*** Product Information and Prices Stored: Nov 12, 2011 12:25:12 ***

novus rc helicopter

Friday, November 4, 2011

Modifying a Honda Civic Exhaust System

Modifying a Honda Civic Exhaust System

Exhaust System

There a a number of reasons that you might want to modify your Honda Civic exhaust system. Some people do it because they like the sound, some are looking for an increase in both horsepower and torque whereas other just like the look of it. Whichever category you fall into there is a compelling argument to upgrade your exhaust system.

Factory exhausts systems are typically extremely restrictive. This is because car manufacturers have to meet strict noise and emissions guidelines in order to be able to sell their vehicles. The good thing about this is that there is a large amount of power which can be gained by getting rid of this restriction. To get rid of this restriction you need a larger size (in terms of diameter) exhaust piping. There are a number of different places that you can obtain this. Many people buy a prefabricated Civic exhaust from a well known brand, either through a parts store or via the internet. Other people choose to have a custom system made up at their local exhaust shop. This is often cheaper and more effective but quality varies depending on where you go.

The look of the exhausts is generally defined by two things: the kind of material used and the type of muffler installed. Generally exhausts systems are made from either mild or stainless steel, the later being the more expensive. This is due to the fact that it is resistant to rust and more visual appealing. Muffler type will depend on your own individual style.

There are the basics of why you might want to upgrade your Honda Civic exhaust system, but remember in the automotive world there is always more to learn.

rolling laundry hamper Capri Sun Lunch Bag

Sunday, October 30, 2011

Check Out G35 03' - 06' Stillen Dual Exhaust System w/ Free Lanyard

G35 03' - 06' Stillen Dual Exhaust System w/ Free Lanyard Review


Click To Buy Best Price from Amazon

Product Feature

  • Dyno proven +13hp at the wheels
  • Stainless Steel Construction
  • Dual Tips
  • Aggressive Tone Without Drone
  • Limited Lifetime Warranty

Product Overview

STILLEN'S hot new exhaust for the Infiniti G35 Sedan (Including 4WD models) is the result of months of development and testing. Made of 100% stainless steel, the system features dual pipes and mufflers and a lifetime warranty. It makes the most power of any G35 system on the market and fits like a glove. 5th gear dyno test runs add 16 HP at 5600 rpm and 14 Ft/Lbs at 4600 rpm. This is the first and best full cat back system available for the G35 2DR. The fit, finish, power and mellow tone have to be experienced to be fully appreciated. No other system available can compare! :: This in a Generation 2 exhaust system with the same great power now with a quieter tone

Read More ...



Complete Tripod Units

Friday, October 28, 2011

Gibson 68200 Stainless Steel Split Rear Dual Cat-Back Exhaust System



Product Brand : Gibson Performance Exhaust
Model : 68200
# List Price : $986.41 # Offer Price : $532.66 # Save Now : $453.75 or 46%

Gibson 68200 Stainless Steel Split Rear Dual Cat-Back Exhaust System


Gibson 68200 Stainless Steel Split Rear Dual Cat-Back Exhaust System
For the enthusiast who wants an awesome look and aggressive powerful sound this split rear bolt-on cat-back exhaust is for you. Gibson’s exhaust systems decrease backpressure, allowing the engine to produce more torque, increase horsepower. Typical gains average of 15-20 horsepower.

Gibson 68200 Stainless Steel Split Rear Dual Cat-Back Exhaust System

  • Exit Is Straight Out The Back; Incl. Muffler/Pipes/Stainless Tips/Resonator
  • Superflow Performance T-304 Stainless Muffler, fully welded, Not packed or screened, nothing to blow out
  • T-304 High Polished Stainless Steel Clampless Slash Tips
  • Lifetime Limited Warranty


Available Stores


Ultrarev
$532.66 (New)
Usually ships in 6-10 business days
MVP Auto Parts
$580.00 (New)
Usually ships in 1-2 business days
AftermarketOnly
$582.43 (New)
Usually ships in 1-2 business days
Amazon.com
$589.89 (New)
Usually ships in 2 to 3 days
wUnderCarParts LLC
$596.96 (New)
Usually ships in 1-2 business days
All About Exhaust
$598.33 (New)
Usually ships in 1-2 business days

art wall sticker

Tuesday, October 25, 2011

Corsa 24404 db Cat-Back Exhaust System for 2006 Dodge Ram

Corsa 24404 db Cat-Back Exhaust System for 2006 Dodge Ram

Product Brand : Corsa

Model : 24404


==================================================================

Corsa 24404 db Cat-Back Exhaust System for 2006 Dodge Ram



Corsa 24404 db Cat-Back Exhaust System for 2006 Dodge Ram

Corsa 24404 db Cat-Back Exhaust System for 2006 Dodge Ram



Corsa 24404 db Cat-Back Exhaust System for 2006 Dodge Ram Overviews
CORSA PERFORMANCE 24404 06-08 Ram Quad Cab 5.7L Cat Back Exhaust


photo collage travel mug Ionpod? Portable Alkalizing Water Bottle

Monday, October 24, 2011

Dynomax 19421 Exhaust System



Product Brand : Dynomax
Model : 19421
# List Price : $961.28 # Offer Price : $304.07 # Save Now : $657.21 or 68%

Dynomax 19421 Exhaust System


Dynomax 19421 Exhaust System
Dynomax Ultra Flo welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) technology to absorb unwanted interior resonance while maintaining a deep performance tone. The pure unadulterated power of Dynomax Ultra Flo Welded mufflers are backed by a limited lifetime warranty and exclusive 90-day performance and sound guarantee.

Dynomax 19421 Exhaust System

  • 100 per cent welded construction for maximum durability high performance muffler for street and track; stainless steel construction for lifelong protection with a limited lifetime warranty
  • System contains all of the parts needed for easy and fast installation with the high flow Ultra Flo welded muffler
  • Unique straight through design maximizes flow and power
  • Exclusive CRF (Continuous Roving Fiberglass) for deep, powerful, true performance sound; won't blow out for long life; withstands temperatures of 1500 degrees Fahrenheit
  • Continuous perf tube design maximizes sound absorption and minimizes turbulence


Available Stores


Amazon.com
$304.07 (New)
Usually ships in 24 hours
myautopartswholesale
$332.38 (New)
Usually ships in 1-2 business days

cuisinart electric pressure cookers cooking utensils Sandbag Fitness Equipment

Sunday, October 23, 2011

Check Out Gibson 614403 Stainless Steel Single Exhaust System

Gibson 614403 Stainless Steel Single Exhaust System Review


Click To Buy Best Price from Amazon

Product Feature

  • Exits Behind Rear Tire; Incl. Muffler/2.5 in. Pipes/3 in. Stainless Tip
  • Superflow Performance T-304 Stainless Muffler, fully welded, Not packed or screened, nothing to blow out
  • T-304 Stainless Steel Clampless Slash Tip
  • Lifetime Limited Warranty

Product Overview

For the enthusiast who wants the most from their vehicle. Engineered and dyno-tested to give you improved acceleration, maximum hill climbing, towing and passing power. Our best performing exhaust system produces maximum torque and horsepower gains at low-end (1800 to 3000 RPMS ) with a deep aggressive exhaust tone.

Read More ...



sprinkler system piping

Saturday, October 22, 2011

Magnaflow 17941 Pro Series Stainless Steel 4" Single Cat-Back Exhaust System


Magnaflow 17941 Pro Series Stainless Steel 4" Single Cat-Back Exhaust System


Rate This Product :


Magnaflow 17941 Pro Series Stainless Steel 4

Magnaflow 17941 Pro Series Stainless Steel 4
Magnaflow Pro Series Stainless Steel 4 inch Single Cat-Back Exhaust System reduces engine heat, back pressure as well as improve exhaust scavenging for high power and performance of the engine. It is manufactured from heavy-duty stainless steel and feature a 4 inch tube. This exhaust system is backed by a lifetime warranty.

Magnaflow 17941 Pro Series Stainless Steel 4

  • Reduces engine heat, back pressure and improves exhaust scavenging for high performance
  • Manufactured from heavy-duty stainless steel
  • Features a 4 inch tube
  • Backed by lifetime warranty

Magnaflow 17941 Pro Series Stainless Steel 4

Available at Amazon : Check Price Now!


*** Product Information and Prices Stored: Oct 22, 2011 16:02:00 ***

Rope Hammock